Honeywell MPIDC1 MAXPRO® Intrusion / Alarm 1 (Single) Door Access Control Module

Honeywell MPIDC1 MAXPRO® Intrusion / Alarm 1 (Single) Door Access Control Module

Honeywell MPIDC1. MAXPRO Intrusion 1 door control module (1 door, up to 2 readers). Control of a door to connect to MAXPRO control panels. Two selectable readers for entry or exit. 12V DC programmable door lock relay. Reader control, doorbell and 3 LEDs. Tamper protection

One door access control module. Connects to a Max Pro control panel. Provides access and egress to the protected premises. Adding more than one MPIDC1 module increases the number of access points and each one communicates with a Control Panel through the IB2 communication bus.

Features :-

• MAXPRO Intrusion 1 door control module (1 door, up to 2 readers)
• Uses high power bus line for star or parallel wiring up to 3.65 km
• Applies as a controller of a door with 2 readers (entry / exit)
• Reads 26-, 32-, 34-, 35- and 48-bit HID, Mifare Classic 32-bit, Desfire 56-bit and EM4102 26- and 40-bit format cards
• It has contact via relay for door control (12V DC, 1.5A)
• It has an input for the door status and an exit button
• Power: 13.8V DC nominal (10V ~ 14.5V DC)
• Consumption: 60 mA in standby, 185 mA with active relay
• -10 ° C ~ + 50 ° C operating temperature
• 93% relative humidity (non-condensing)
• Dimensions: 130 (W) x 86 x 26mm
• Weight: 120g